Do you need replacement parts for your Bioloid chassis? The Robotis FP04-F53 structural components should help!
This new Dynamixel servo in the X series is a great addition to the family with its compact design, extensive feedback, various wiring options, and improved heat sink!
This set of 12 IBB-01 supports for TurtleBot Waffle will allow you to connect various devices to upgrade your mobile robotics platform!
4 pieces of 300mm black anodised MakerBeam beams (black). Width and height = 10mm x 10mm. You will find below a technical drawing.
Check out MakerBeam beams range.
One thing’s for sure, with this Pack of 200 M2.5×6 Screws, your Dynamixel servos won’t be going anywhere!
The GS-12 gyro sensors allows your Dynamixel or Bioloid mobile robots to kwnow their angular speeds on two axis.
The 4P JST Expansion Board is an extension board that allows you to add additional features to your robot.
The MakerBeam T bracket can be used in all your projects based on OpenBeam and MakerBeamXL profiles.
Dynamixel is back with a groundbreaking model, the 2XC430-W250-T. A single Dynamixel servomotor to drive two axes. Two degrees of freedom for a single servomotor!
1 piece of 900mm clear anodised MakerBeam beams (clear). Width and height = 10mm x 10mm. You will find below a technical drawing.
Check out MakerBeam beams range.
This pack of medium-length X4P cables for Dynamixel XM-430 offers greater flexibility in terms of wiring.
Mechanical set for Dynamixel RX-24F, RX-28 and MX-28 actuators
The CM-530 main controller drives your Dynamixel servomotors AX and MX. It carries a ARM Cortex STM32F103RE microcontroller and is programmed in USB with the RoboPlus software.
This 5-pin cable designed for the UM7, the small module from Redshift Labs, is available in one-way and two-way versions!
8 pieces of 200mm black anodised MakerBeam beams (black). Width and height = 10mm x 10mm. You will find below a technical drawing.
Check out MakerBeam beams range.
One Dynamixel XM-430 servo, 3 mounting options! With the FR12-S101K set of structural components, you can mount your Robotis servo laterally.
Properly fix your Dynamixel servomotors with this set of 200 M2.5x8 wrench bolts. An essential item for your toolkit!
These MakerBeam L brackets allow you to design robust and durable projects based on MakerBeam or OpenBeam profiles.
Bag of 250 regular nuts for MakerBeam.
Check out our MakerBeam nuts and bolts.
Compatibility: MakerBeam, OpenBeam, MakerBeamXL
Bearings for MakerBeam that comes with 10 bearings, 10 M3 12mm squareheaded bolts with hex hole, 10 washers, 10 M3 nuts and 10 M3 self locking nuts. Bearing thickness: 5mm, outside dimension: 13mm, inside diameter: 3mm.
Check out our MakerBeam accessories range.
Compatibility: MakerBeam
1 piece of 600mm clear anodised MakerBeam beams (clear). Width and height = 10mm x 10mm. You will find below a technical drawing.
Check out MakerBeam beams range.
4 pieces of 300mm clear anodised MakerBeam beams (clear). Width and height = 10mm x 10mm. You will find below a technical drawing.
Check out MakerBeam beams range.
These MakerBeam anodised corner cubes (12 pieces) provide an extra fastening option. The pack comes with 50 countersunk bolts and 1 allen key.
Check out our MakerBeam brackets range.Compatibility: MakerBeam