Robotis put together this pack of 20 FP04-F55 Dynamixel Cable Holders to more efficiently organise Bioloid robot cables.

Four years after the 4, the Raspberry Pi 5 has arrived. It benefits from a noticeable improvement in its performance, as well as some new features.

The DYNAMIXEL MKR shield is an extension board that plugs into the popular Arduino MKR.

You have a programmable Crazyflie drone that’s now ready to explore its environment and embark on its first adventures? Be sure to keep a few compatible spare parts on hand, just in case!

You can never have too many assembling tools, especially as the screws for Darwin-Mini are so easy to lose... Rebuild your stocks with the Robotis screw set for Darwin-Mini!

Operating with five intelligent Dynamixel servomotors, the WidowX robot arm offers some great opportunity.

Check out this YDLIDAR G4 360° laser range finder: an ultra-reduced model offering an amazing performance!

The Dynamixel XM540-W150-R servo motor falls in the X family of Robotis servos: it’s scalable and offers no fewer than 6 operating modes for controlling your robot with millimetre accuracy.

The Sabertooth 2x5 motor driver can supply two DC brushed motors with up to 5A each continuously. It’s the perfect solution for small robots!

This camera mount is designed to attach a Raspberry Pi camera to a TurtleBot3 robot or OpenManipulator TurtleBot3 controller.

The BT-210 Bluetooth Module is a wireless communication module using Bluetooth technology: it allows your robot to connect with other devices fitted with a Bluetooth 2.1 interface.

The Intel® RealSense™ Depth Camera D405 is a stereoscopic camera module for short-range colour image capture both indoors and out.

The Gear Set for Dynamixel XH430/XM430, Gear Ratio 210:1 includes all the replacement gears you need for your compatible Dynamixel servos.

Put the SyRen 50 motor driver to the test: up to 100A peak, 4 operating modes for controlling velocity or direction, and 100% safe.

Small, accurate, low cost and fast, the 2D 360° RPLIDAR A1M8 laser scanner can perform about everything you can imagine, from 3D mapping to obstacle detection.

Bag of 25 square headed bolts M3 for MakerBeam, length: 25mm.
Check out our MakerBeam nuts and bolts.
Compatibility: MakerBeam

Looking for a way to make your robot’s movements more precise? Do you want your mobile robot to be able to avoid obstacles and follow certain markers? By connecting a UST-10LX Scanning Laser Range Finder to your creation you will make it even more autonomous, even more responsive to its immediate surroundings!

The Crazyflie 2.1+ quadcopter nano kit, with its USB radio dongle, is a programmable and fully open-source long-range drone (ROS compatible).

The Dynamixel XH540-W270-T servo motor generates one of the most powerful torque in the Dynamixel X series. It offers all the advantages of Robotis XH servos in terms of high-quality design and control modes–plus a TTL interface.

This battery is compatible with TurtleBot3 and Robotis OP robots and incorporates a protection system.

Make sure you choose tools truly compatible with your M2.5 screws and for fixing the servo horns and bearings on your servo motors with this Pack of 400 M2.5 nuts for Dynamixel RX-series servo motors!

These MakerBeam brackets allow you to design robust projects with OpenBeam and MakerBeamXL profiles.

Connect your UM7 directly to your computer with this USB expansion board.

The Dynamixel FR12-H103GM Frame Set allows you to quickly attach a Dynamixel X430 series servo motor.