XH/XM series servos are equated with quasi-total control and durable, ergonomic design, and the Dynamixel XH540-V150-R servo motor is no exception to this rule.
The Dynamixel shield for Arduino from Robotis can be used to control yourDynamixel servo motors using your Arduino board or an OpenCR controller.
FRP42-H221K hinge for the Dynamixel Pro servomotors
The MX-64AR is a Dynamixel servomotor, with high-level control features and very precise. It is more powerful than the MX-28AR and features the same caracteristics than the MX-64R except for the aluminium case enabling a better heat dissipation.
10 cables (14cm lenght) with 4 pin connectors for the Dynamixel servomotors of the DX, RX and EX series.
Mounting plate for Dynamixel actuators RX-64, EX-106+, MX-64 and MX-106
The Dynamixel XH540-W270-T servo motor generates one of the most powerful torque in the Dynamixel X series. It offers all the advantages of Robotis XH servos in terms of high-quality design and control modes–plus a TTL interface.
The BT-410 USB Bluetooth dongle enables you to establish communication between your robot and your PC via the BT-410 slave module.
The Gear Set for Dynamixel XH430/XM430, Gear Ratio 210:1 includes all the replacement gears you need for your compatible Dynamixel servos.
This open-source controller would be the ideal choice for your TurtleBot3 robot; it is an ROS controller equipped with an ARM Cortex-M7 processor capable of accommodating your Dynamixel servos and many other modules!
The Sabertooth 2x5 motor driver can supply two DC brushed motors with up to 5A each continuously. It’s the perfect solution for small robots!
FRP54-A110K frame in aluminium for the Dynamixel Pro servomotors.
You can never have too many assembling tools, especially as the screws for Darwin-Mini are so easy to lose... Rebuild your stocks with the Robotis screw set for Darwin-Mini!
The MX-106T is a Dynamixel servomotor, with high-level control features and very precise. It is by far the most powerful of the Dynamixel servomotors.
10 cables (18cm lenght) with 4 pin connectors for the Dynamixel actuators of the MX (R version), RX and EX series.
Two frames with bolt and screws for Dynamixel MX-64 actuator.
The MGSS-10 magnetic sensor is a contact sensor... requiring no actual contact!
This Dynamixel servo controller offers multiple functions for fully operating your robot in navigation mode. It includes various sensors and enough connection ports to add several devices.
The Dynamixel XH540-W270-R servo motor can generate a powerful torque and offers numerous control options to the most hard-to-please robotics engineers and fans of all-terrain vehicles.
The gear set for Dynamixel XH430/XM430, Gear Ratio 350:1 includes all the replacement gears you need for your compatible Dynamixel servos.
Use the M3x8 wrench bolts to fix your Dynamixel servos securely.
Let your Sabertooth control and supply two DC motors, a microcontroller and a couple of servos, and your robot will reach new highs in manoeuvrability and autonomy!
FRP54-I110K frame in aluminium for the Dynamixel Pro servomotors.