Happy Hacker Bundle

Detailed Description of the Happy Hacker Bundle

To embark on your hardware development journey, you'll start by creating your hardware on a prototype board. Once satisfied with your design, you can solder the components onto the prototype board, and you're ready to go!

Crazyflie 2.1+ - Open Source Micro Quadcopter Drone:

The Artist Bundle includes everything you need to dive into the Crazyflie 2.X platform and explore aerial robotics. In addition to the Crazyflie 2.1+, this bundle also includes the Crazyradio 2.0, which allows you to connect to a computer and access advanced features like real-time recording and parameter tuning.

Crazyradio 2.0:

The Crazyradio 2.0 allows the Crazyflie and Bolt to easily connect to a computer for advanced use. Using our Python library, it's quick to establish a low-latency link for controls and real-time recording and parameter tuning. The dongle comes with a USB bootloader where you can easily drag and drop your firmware.

Debugging Adapter:

Due to the small size of the platform, there are limitations on the types of connectors that can be used. Therefore, a debugging adapter kit has been designed to simplify the connection of a debugger to either of the MCUs by converting the connector pins into standard JTAG and SWD pins.

Connection Board:

You can explore and develop new hardware designs without the need for soldering by using the prototyping expansion board. Just set up the circuit on a breadboard and connect it to the Crazyflie 2.X. The board offers all 20 expansion connector pins, along with a dedicated area where a 1-wire memory can be installed, allowing the board to be automatically detected by the firmware.

Prototyping Board:

Add a prototyping area to your Crazyflie 2.X and take your electronics to the skies. Simply solder directly onto the expansion board and plug it into the expansion port.

Spare Male Connectors:

This product is intended for use with the Crazyflie 2.X expansion board system. These pin headers are an upgraded version of the pin headers provided with the Crazyflie 2.X kit. They are 1mm longer, which is necessary for thicker batteries.