Dynamixel bolts and nuts

Have you ever been afraid of running out of assembly parts in the middle of a project? With this set of 400 S1 Bolt PHS M2x6 for Dynamixel Servomotors , you’ll have more than enough bolts to keep going for a while !

Make sure you choose tools truly compatible with your M2 and S1 screws and for fixing the servo horns and bearings on your servo motors with this Pack of 400 M2 nuts for Dynamixel AX-series servo motors!

The BNS-10 Nut and Bolt Set is a kit that will allow you to not only assemble Dynamixel AX (12+) servo motors, but also fit your mobile robot with an AX-S1 sensor and CM-5 or CM-510 controller.

Add this 50 pieces S2 PHS Bolt M2*8 kit for Dynamixel servomotors to your roboticists’ toolbox.

You can never have too many assembling tools, especially as the screws for Darwin-Mini are so easy to lose... Rebuild your stocks with the Robotis screw set for Darwin-Mini!

Use the proper bolts for fixing your Dynamixel servos!

The BNS-30 bolt/nut set for Dynamixel AX-series servos includes 70 tapping screws and can be used as an add-on to your BNS-10 set.

A set of 50 Bolt PHS M2x10 screws for mounting your Dynamixel servomotors.

Make sure you choose tools truly compatible with your M2.5 screws and for fixing the servo horns and bearings on your servo motors with this Pack of 400 M2.5 nuts for Dynamixel RX-series servo motors!

One thing’s for sure, with this Pack of 200 M2.5×6 Screws, your Dynamixel servos won’t be going anywhere!

An essential accessory for fixing your Dynamixel servos, this Pack of 200 M2.5x4 type screws will allow you to work on many more robotics projects!

A set of 200 M2x3 Wrench Bolts especially designed to fix your RX Series Dynamixel servomotors.

Properly fix your Dynamixel servomotors with this set of 200 M2.5x8 wrench bolts. An essential item for your toolkit!

Use the M3x8 wrench bolts to fix your Dynamixel servos securely.