Dynamixel mounting plates, horns and bearing
You will find here the appropriate parts to tightly fix your Dynamixel actuators to the robot’s frame.
Support set for RX-64, EX-106+, MX-64 and MX-106 Dynamixel servomotors
Mounting plate for Dynamixel smart actuators that is compatible with RX-64, EX-106+, MX-64 et MX-106 actuators.
Mechanical set for Dynamixel RX-24F, RX-28 and MX-28 actuators
With the FR04-G101GM set from Robotis, you’ll get the same gripper frames as the ones used for the GP robot.
This EPX430-BR101 kit is an enhanced extension for the X430, offering optimum performance and even greater accuracy.
ALF-M101 is a mounting plate compatible with the DYNAMIXEL aluminium profiles.
Horn and Bearing HN05-I1 for Dynamixel actuators
Horn and bearing set compatible with RX-64 (N101 type), EX-106+, MX-64 and MX-106 Dynamixel actuators.
Kit containing horn, frame and bearing for Dynamixel actuators
Mounting plate for Dynamixel actuators RX-64, EX-106+, MX-64 and MX-106
Two frames with bolt and screws for Dynamixel MX-64 actuator.
Set with frame, horn and bearing for Dynamixel actuators
Mounting plate for Dynamixel actuators RX24F, RX-28 and MX-28
Fixation frame for Dynamixel actuators compatible with RX-24F (N101 type), RX-28 (N101 type) and MX-28 smart actuators.
Fixation frame set for the Dynamixel EX-106+ actuator
Horn for Dynamixel actuators RX-64 (N101 Type) ,EX-106+, MX-64 and MX-106
Horn and bearing set for Dynamixel actuators compatible with the Dynamixel RX-64 (N101 type) and EX-106+.
Horn and Bearing set for Dynamixel compatible with RX-24F and RX-28 actuators.
Horn and bearing set for Dynamixel actuators compatible with the RX-24F, RX-28 and MX-28 actuators.
Frame for Dynamixel actuators EX-106+ and MX-106 to control then in dual mode (two synchronized Dynamixel actuators that are controlled simultaneously in a parallel to increase the torque).